(Chart below is based on a 32" band measurement. Please see below for complete measuring instructions)
MEASURING
INSTRUCTIONS
Read the guidelines below and then compare
your measurements to the above size guides. For the best fit, wear
little or no clothing while measuring, and use a fabric tape measure.
Band: Take a snug measurement
around the rib cage directly under the bust. Add 4 inches if the measurement
is even; add 5 inches if the measurement is odd. If the rib cage measurement
is 36" or higher, add 2 inches if the measurement is even and
3 inches if the measurement is odd. As a check and balance, take an
over-bust measurement: Measure around the body from the center of
the back, up under the arm, to the middle of the chest wall above
the bust. This number should be close to the band size you determined
previously.
Cup size: Measure around
the fullest part of the bust, making sure the tape measure lies flat
around the body. The difference between band measurement and this
measurement in inches will determine the cup size. (Note: this measurement
is most accurate when you wear an unlined or slightly contoured bra.)